46 www.plastidip.co.uk Sales +44 (0) 1730 823 823 TECH DATA VLP VINYL AND LEATHER REPAIR page 33 SPECIFICATIONS Solids (wt): 18% Temperature use range: -23°C to 93°C (-10°F to 200°F) Tensile: (ASTM D-882) 2,900psi Bond strength: (ASTM D-882) 2602 load Elongation: (ASTM D-882) 240% Dry colour: clear Viscosity range: 1,200–2,500 cps Coverage: 60 sqft (56 m2) per gal (approx) at 5 mls Shelf life: 1+year at 25°C (77°F) VYNA BOND PLASTIC REPAIR PATCH page 34 SPECIFICATIONS Solids (wt): 16% Tensile: (ASTM D-882) 2400psi Peel strength: (ASTM D-413) vinyl swatch de-laminates before Vyna bond Ultimate elongation: (ASTM D-882) 935% @ 3 mls Bond strength: (ASTM D-882) 7949 load UV stability: limited Colour (wet): milky Colour (dry): clear Coverage: 97 sqft (9 m2) approx per gal at 2–3 mls Shelf life: 1 year @ 25°C (77°F) Temperature use range: -23°C to 93°C (-30°F to 200°F) SUPER GRIP page 35 SPECIFICATIONS Finish: Grippy Colour: (dry) clear Shelf life: 1+ year at 25°C (77°F) Temperature use range: 21°C (70°F) Coverage: 37 sqft (35 m2) per 326 g can Surface preparation All surfaces to be coated must be dry, free of any oils, dust and moisture USE ADEQUATE VENTILATION PRIMER page 43 SPECIFICATIONS Solids (wt): 16% Shelf life: 1 year at 21°C Coverage: 30 sqft (28 m2) per litre approx Viscosity range: 200-400 cps Industrial/commercial airless equipment may be used Use as described in Equipment Settings Tip sizes: 011–019 Pressure: as needed Dilution: as needed RECOMMENDED EQUIPMENT AND SETTINGS Recommended equipment and settings: Gun: Binks model 62 Nozzle: 63PB Cap: 63PB Needle: 363-A Material: 15-20psi Atomization: 15-25psi Dilution: as needed Clean up: Plasti Dip THINNER, Toluene or Xylene
RkJQdWJsaXNoZXIy NTIxMTY=