Plasti Dip product information 2023

5 www.plastidip.co.uk Sales +44 (0) 1730 823 823 PROTECTIVE COATINGS COMMERCIAL AND INDUSTRIAL HEAVY-DUTY, FLEXIBLE, ELASTOMERIC COATING SEALS OUT AIR AND MOISTURE; STOPS RUST AND CORROSION; RESISTS ACIDS, SOLVENTS, WATER AND ALKALINES Properly applied, Plasti Dip coatings protect virtually any surface They form an air and elastomeric moisture-tight film that will not chip, crack or peel Plasti Dip maintains a 300–400% elongation in temperatures ranging from -34°C to +92°C, even under extreme conditions Plasti Dip is a tough coating that resists alkalines, acids, salts, moisture and most chemicals to ensure positive protection for concrete or metal structures Because Plasti Dip is flexible, it is tough when extreme expansion or contraction occur Most other paints or coatings tend to chip, crack, peel or break down To maintain a Plasti Dip coating, even after years of exposure, simply wash thoroughly to remove grime, residue and recoat STRUCTURAL CONCRETE Sealing block walls, roadway structures, swimming pools, foundations, fountains, walls and ceilings in processing plants – wherever concrete deterioration is a problem STRUCTURAL STEEL Bar joists, beams Metal subjected to any corrosive environment: bridges, hand rails, railings, catwalks, storage towers, belowground holding tanks, exposed machinery, wire racks for food services and around acid baths Wherever metal is attacked, PLASTI DIP performs. HINTS AND TIPS Ideal conditions are low humidity, little or no air movement, away from direct sunlight or high temperatures and well ventilated FAQ’S Is priming necessary? Plasti Dip Primer is recommended for application to smooth nonabsorbent, nonporous surfaces such as metal and UPVC NOTE: it will prevent you from being able to peel the Plasti Dip multipurpose coating off later Why am I getting a dull finish? Plasti Dip has a matt finish (unless you use the Glossifier enhancer top coat) However, if you are experiencing a cloudy/hazy finish, it’s likely to be caused by high humidity Avoid these conditions or add 5 to 10% Plasti Dip Thinners to the solution Plasti Dip IS RECOMMENDED FOR COMMERCIAL AND INDUSTRIAL USES See the full range on the commercial side of our website at www.plastidip.co.uk

RkJQdWJsaXNoZXIy NTIxMTY=