FAQ
Plasti Dip frequently asked questions….
I’d like to dip my car, how do I do it?
We’ve written a guide to dipping cars and you can find it here
How long can you keep Plasti Dip on your car?
If you apply Plasti Dip correctly and maintain it well, washing the vehicle by hand and using dip care cleaner, it should last 3-5 years. The video below gives a review of a Plasti Dipped van after one year of wear and tear.
What is the coverage?
Plasti Dip regular; coverage 20sq ft (1.85sqmtrs) per litre.
For brushing you can thin with Plasti Dip thinners by up to 20% to ease application and increase coverage.
To spray mix 50/50 by weight with Plasti Dip thinners. Coverage typically 3sq metres.
Plasti Dip aerosols; Cover 0.5-1sqmtr per can depending on colour change and user.
Plasti Dip/ HCF primer; Coverage 2.3sq metres per litre.
HCF Hard Coat; 2.3sq metres per litre.
For Spraying dilute 10% with distilled water.
ColorBond Leather, Vinyl & Hard Plastic Refinisher; 2-3 sq metres per can.
Dip Care Range;
Dip sealant; 10ml per sq metre.
Dip Cleaner; 25ml per sq metre.
Dip Prep; 25ml per sq metre.
Dip Revive; 25ml per sq metre.
(Typical medium size car= 5sq metres)
What is the purpose of Plasti Dip?
Plasti Dip provides a decorative protective durable rubberised coating which can be easily removed if required
Does Plasti Dip work well on wood?
Yes, it works well as a protective coating on most woods and it is weather ability tested for 7-10 years
Is Plasti Dip food safe?
No it is not, however it has been used successfully by many customers to coat cutlery handles, but it is not certified as food safe.
How long does it take Plasti Dip to dry completely?
Approximately 4 hours per coat and in order to remove it easily you need to apply 6-8 coats
Is Plasti Dip aquarium safe?
Plasti Dip has been used extensively in ponds and aquariums for many years without incident to our knowledge, however it is not certified as aquarium safe.
Is Plasti Dip good for cars?
Plasti Dip has been used successfully for changing the colour of whole cars, detailing and wheels. It is probably the most economical way of changing your colour compared to body shops and vinyl wrapping and an excellent finish can be achieved by a competent DIY’er
How do you Plasti Dip wheel rims?
Thoroughly wash with hot water, use automotive panel wipe paint degreaser or our Dip Care Degreaser. Allow to thoroughly dry. Apply the first coats as a mist coat and build from there. You will require 1 aerosol can per wheel up to 18 inches.
“Why am I getting a dull finish ?”
Plasti Dip® protective coating has a matte finish. If you are experiencing a cloudy or hazy finish, it’s likely to be caused by high humidity. Avoid these conditions or add approximately 5-10% of our Plasti Dip Thinners to reduce the problem.
“Why is the Plasti Dip® sagging or dripping ?”
Removing an item too quickly when being dipped, is usually what causes this problem. Remove at a rate of 1” every 5 seconds. If experiencing runs or sags when spraying, move can further away from the surface and apply a lighter coat. Sagging and dripping can also be caused by high humidity, high temperatures, windy conditions, and/or direct sunlight. Ideal conditions are low humidity, and little to no air movement in a well ventilated area.
“Is priming necessary ?”
In some cases you do not need to prime the surface, but this is dependent on the type of material you are coating. Generally, for smooth non porous surfaces such as metal and plastic we would always recommend using our Primer.
“Why isn’t my Blaze colour very bright?”
To get the best colour and to avoid colour staining on underlying surfaces we recommend applying Plasti Dip regular White base coat before applying the Blaze range due to it’s florescent pigments.
“Is Plasti Dip® safe to use on children’s toys, animal containment and/or on kitchen utensils ?”
Plasti Dip does not contain any heavy metals, and when completely dry, is considered harmless. However, it is not recommended that it be used on items that may be chewed or inserted into the mouth, as it may present a choking hazard.
“How thickly can I apply Plasti Dip ?”
When following the directions, you can apply as many coats of Plasti Dip® protective coating as you like. For most applications 7-10 mils thickness is adequate. Only in extreme cases or for aesthetic reasons is more thickness necessary. (Note: a mil equates to 1000th of one inch).
“Can I add a colourant or pigment to the Plasti Dip to create a custom colour ?”
Mixing different colours of Plasti Dip® protective coating can be done very simply to achieve other colours. We will soon have pigments available for sale in most popular colours. For most pigments, add approximately 1oz of pigment to 1 litre of Plasti Dip. Please also see our new product “Create Your Colour” which combines 5 pigments with a 651ml can of clear coating.
“Can Plasti Dip® be used to repair a damaged dishwasher rack ?”
While Plasti Dip has been used for dishwasher rack repair in the past, it is not recommended. Our ReRACK product is much better suited for this application, and works very well.
“Is Plasti Dip chemical resistant ?”
Plasti Dip protective coating has excellent resistance to acids, alkaline, and most common household chemicals. However, it is best to test this before going ahead with your application. Plasti Dip® does have limited resistance to petroleum based products. (Please see our “HCF” coating where contact with petroleum is required).
“Can Plasti Dip® be used to seal electrical connections ?”
While Plasti Dip has excellent dielectric properties (insulates against shock), our Liquid Tape Electrical product is specifically formulated and conveniently packaged for this application.
“Can Plasti Dip be applied to PVC ?”
Rub acetone or finger nail polish remover in an inconspicuous area and apply Plasti Dip® to test for success. We recommend applying HCF to UPVC surfaces.
“Can you speed up the dry time of Plasti Dip ?”
Very low oven heat (between 100° – 150°) may be used on a conveyor. However, the part or object should first set or hang dry for 30 minutes for the fast releasing solvents to escape.
“Does Plasti Dip contain polyvinyl chloride ?”
Plasti Dip® does not contain any polyvinyl chloride or any other vinyl resins.
“Is there any product on the market that can be applied over Plasti Dip to provide a glossy finish ?”
Our Glossifer (F-799 Top Coat) will provide a glossy finish and is currently available in 750ml and 2.5 litre and 5 litre cans and soon aerosol.
Super Grip – Non-skid Fabric Coating
“Can I apply Super Grip directly to the floor surface ?”
Absolutely not! Super Grip® non-skid fabric coating is only designed for use on most fabric surfaces to stop skidding. Do not use Super Grip® directly on wood, ceramic, concrete, or other types of flooring surfaces.
“What if I get Super Grip on a surface I didn’t intend to ?”
DAP®, Goo Gone®, or mineral spirits can be used to clean up Super Grip®, but try it in an inconspicuous area first to ensure the cleaning solution doesn’t affect the surface you are cleaning.
Plastiseam – Protective Coating
“Can Plastiseam be used with underwater applications ?”
While Plastiseam is designed to seal against moisture penetration in sewn seams, it is not recommended for applications requiring permanent submersion in water.
VLP – Vinyl Repair
“Can VLP be used to repair damaged dishwasher racks ?”
While VLP has been used in the past to recoat damaged dishwasher racks. Our ReRACK product is specifically formulated and conveniently packaged for this application.
“What is the difference between the VLP and Vyna Bond products ?”
VLP is specifically designed for tears and splits in vinyl and some leathers, while Vyna Bond is specifically formulated and conveniently packaged for patching holes in vinyl, even under water.
“Can VLP be sprayed ?”
VLP can be sprayed by using a pressure-pot with a conventional spray gun and airless spray equipment. Please contact us for more information.
Liquid Electrical Tape
“What can I use to reduce Liquid Tape ‘Electrical’ if it becomes too thick, or if I need a thinned down Liquid Electrical Tape coating for my application ?”
“What is dielectric strength ?”
Dielectric strength refers to a material’s ability to insulate against electrical shock. Liquid Tape ‘Electrical’, being rubber based, provides excellent electrical insulation and is suitable for all types of applications. Further dielectric information is available upon request.
“Can Liquid Tape ‘Electrical’ be removed ?”
Yes, carefully cut and peel Liquid Tape ‘Electrical’ from the repair area. (Be sure to follow all health and safety warnings as well as local electrical codes when working with electricity).
Vyna Bond – Leather & Vinyl Repair
“Can I use Vyna Bond on leather and other fabrics ?”
While Vyna Bond is meant for use on vinyl and comes with a vinyl swatch for patching, it also works well on other porous fabrics and materials. It’s best to test the suitability of Vyna Bond for your vinyl repair applications.
“What is the difference between the VLP and Vyna Bond products ?”
VLP is specifically designed for tears and splits in vinyl and some leathers, while Vyna Bond is specifically formulated and conveniently packaged for patching holes in vinyl, even under water.
“Can Vyna Bond be sprayed ?”
Vyna Bond can be sprayed by using a pressure-pot with a conventional spray gun and airless spray equipment. Please contact us for more information.